Facade

The powder-component decorative dry mortar designed to protect and decorate the interior and exterior wall surfaces made of thermal insulation
or extended mortar, concrete blocks, concrete, plywood and other similar materials. Depending on the process, the final coating can be derived.
COLOURS FIX mineral Facades has high mechanical strength, very well received in a variety of surfaces, has a good vapor permeability, easily prepared and applied, and has a long service life.

Colour: White
Packaging: 25 kg

Made on the basis of natural and synthetic resin and ground marble.
Colours fix acrylic facade is intended to decorate the exterior and interior surfaces. The characteristics Colours fix acrylic facade are resistant to weathering, waterproofing, water vapor permeability and economy.
The possibility of toning in a different color.

Tested according to: BDS EN 1542:2002 , BDS EN 1062-3:2008, BDS EN ISO 7783-2:2001, BDS EN 13687-3:2002
Consumption: granulation 1,5 mm 9-10 m2/25 kg
Granulation: 2 mm 7-8 m2/25 kg
Packaging: 25 kg

Decorative finishing plaster manufactured based on natural and synthetic resins, white marble and special of additives.
A breather is stable in all climates.
The possibility of toning in different nuance of color.

Consumption: 1.5 mm granulation 9-10 m2/25 kg
Grain size: 2 mm 7-8 m2/25 kg
Packaging: 25 kg

Made on the basis of acrylate and mermenog grains of different colors and granulation. Colours fix kulir is finished decorative mosaic that very good adhesion to the substrate and resistant in all climate areas.

It is intended for protection and decoration of exterior and interior walls, Sockets, staircases and the like.

Consumption: 4 kg/m2
Packaging: 25 kg

CF glet is a ready-made dispersive compound used for fine leveling of interior and extrarior walls. It is specfic for simple use, exceptional application and good adhesion. CF glet is easily honed which enables providing a very smooth surface. Suitable for machine and manual application.
CF glet is recommended for installation systems XL 55 and FP 100 silicate boards.

Consumption: 1,5-2 kg/m2 for a two layer application.
Packaging: 25 kg