Construction adhesives

The adhesive for ceramic works based on cement, of additives and quartz sand. Designed for floor and wall inner surface.
Kvarc fix is characterized by good qualities of processing, economy and quality.

Mixing ratio: 6.0 to 6.5 liters per 25 kg
Time for application: about 2 hours
The possibility of grouting: after 24 hours
Consumption: 3.5 kg per m2
Packaging: 25 kg

High quality flexible adhesive based on cementitious, sepcijalnim of additives and quartz sand. Intended for interior and exterior floor and wall surfaces, and surfaces with underfloor heating.
Kvarc fix special is characterized by increased resistance to mechanical, weather dramatic temperature effects, high stability and quality.

Tested by: BDS EN 1346: 2008, BDS EN 1348: 2008, BDS EN 1308: 2009, BDS EN 12002: 2009
The possibility of grouting: after 24 hours
Class adhesive: C2TE,
Packaging: 25 kg

Building adhesive cement, silica sand and special of additives intended for fixing insulation boards of EPS, XPS (polystyrene, styrofoam, etc.).

Consumption: 4.5-5 kg/m2
Packaging: 25 kg

Purpose adhesive for thermal insulation boards (polystyrene) and reinforcing mesh facade based on cement, special fillers and quartz sand.
The adhesive contains elastic polymers and resistant to weathering and freezing.

Tested by: BDS EN 13494: 2003
Consumption: for fixing
EPS boards: 4-5 kg/m2 for the preparation of the reinforced layer: 3-4 kg/m2 Reinforcement possible after 24 hours
Applying top coat possible after 48 hours
Packaging: 25 kg

HIGH QUALITATIVE WHITE adhesive for the finishing gel of the thermo-isolation system. It is produced on the basis of marble, white cement and special additives.
Baumann universal adhesive contains elastic polymers and is resistant to weather influences. Suitable for indoor and outdoor use.

Consumption: 3.5 – 4.5 kg/m2.
Packaging: 25 kg, 48 pieces per pallet

Kvarc fix adhesive for light concrete blocks the adhesive intended for aerated concrete masonry blocks of – light concrete blocks, for bonding elements of aerated-concrete blocks and filling the resulting openings.

Consumption: 25 kg/m3